|
For now the tool box latch is held shut with a wing nut and machine screw, I will probably go to a cotter key kind of thing. Thi
For now the tool box latch is held shut with a wing nut and machine screw, I will probably go to a cotter key kind of thing. This is a Craftsman 20" steel tool box. The tray is a little narrow though, I might bounce some tools from the tray down into
Date: 09/15/2004
Views: 556
|
The tool box is currently bolted to the bracket, until I decide how to hold it down, and be able to remove it quickly.
The tool box is currently bolted to the bracket, until I decide how to hold it down, and be able to remove it quickly.
Date: 09/15/2004
Views: 513
|
Just enough room to the side to allow use of the latches, and enough room to the back to clear the hood spring.
Just enough room to the side to allow use of the latches, and enough room to the back to clear the hood spring.
Date: 09/15/2004
Views: 518
|
TWindow washer pump relocated to radiator panel, next to the radiator
TWindow washer pump relocated to radiator panel, next to the radiator
Date: 09/15/2004
Views: 488
|
|
Nice tight fit on the bottom of the box. Next I have to make the brackets that will allow it to be bolted in.
Nice tight fit on the bottom of the box. Next I have to make the brackets that will allow it to be bolted in.
Date: 09/13/2004
Views: 492
|
After welding the pieces together, we found the frame shrunk, so we cut it in half, and welded a brace to it. It isn't perfectly
After welding the pieces together, we found the frame shrunk, so we cut it in half, and welded a brace to it. It isn't perfectly level since the toolbox's bottom is kind of deformed. I suggest making the final 45 degree cuts after welding the first 3 piec
Date: 09/13/2004
Views: 706
|
Toolbox frame, this will get bolted to the inner fender and the radiator support.
Toolbox frame, this will get bolted to the inner fender and the radiator support.
Date: 09/13/2004
Views: 511
|
That's a huge space for such a small item. Some owners put a 2nd battery there, but I want to get my noisy space using toolbox o
That's a huge space for such a small item. Some owners put a 2nd battery there, but I want to get my noisy space using toolbox out of the cab...
Date: 09/13/2004
Views: 535
|
